अपने प्रियजनों के साथ वीकेंड DIY गतिविधि के लिए एकदम सहीDIY डेट किट - अपना टोट बैग डिज़ाइन करें

You’ll receive all the designs shown in the image section. Some of the smaller designs may come combined in a single patch, which you can easily cut and use individually as needed.

Sizes vary on the design aspect ratio. A rough estimate of sizes of big (individual or cluster of small designs) and small patches is mentioned in product images.

Yes, there is enough margin between every 2 designs for you to cut and place as per your requirement

1. Remove wrinkles from the area where you want to transfer the patch
2. Place the patch on the wrinkle free area
3. Iron for 10-30 seconds on low-medium heat settings. Iron repeatedly if fabric is thick like denim.
4. Let it cool to room temperature → Peel film slowly
5. Put film back on the transferred patch → Iron again for 10 sec to lock the patch in the fabric
6. Follow wash instructions

Best results on cotton, cotton blends, denim, canvas, and most woven fabrics. Avoid leather, silk, polyester blends with heat sensitivity, or stretchy lycra/spandex.

Set to medium-high (around 160–170°C) or the “cotton” setting on most irons. No steam.

Press for 10–30 seconds with firm pressure, then check edges. If needed, re-press for a few seconds.

Nope - always use a thin cotton cloth or baking paper between the patch and the iron to protect the print.

Absolutely — set it to 160°C for 10–12 seconds with medium pressure.