1 4

Peek And Slay | Iron-on Patch | Warrior Bloodline

Peek And Slay | Iron-on Patch | Warrior Bloodline

⭐⭐⭐⭐⭐ 4.96 based on 1,489 ratings

  • Hide any stain in 60 seconds
  • DIY your clothes and make them cooler
  • Stays atleast 25-30 washes
Rs. 29.00
Rs. 38.00 Rs. 29.00
Sale Sold out
Taxes included. Shipping calculated at checkout.

Free Shipping and CoD available
View full details

How to use ⬇️

How to apply?

  1. Remove wrinkles from the area where you want to transfer the patch
  2. Place the patch on the wrinkle free area
  3. Iron for 10-30 seconds on low-medium heat settings. Iron repeatedly if fabric is thick like denim.
  4. Let it cool to room temperature β†’ Peel film slowly
  5. Put film back on the transferred patch β†’ Iron again for 10 sec to lock the patch in the fabric
  6. Follow wash instructions

Can I use this patch to cover a stain or mark?

Yes! Hot Sticks are great for hiding stains. Just note - some designs aren’t 100% opaque, so a faint shadow of the stain might still peek through. But they’ll still do an awesome job of distracting the eye and making your outfit look fresh again.

What fabrics can I use them on?

Best results on cotton, cotton blends, denim, canvas, and most woven fabrics. Avoid leather, silk, polyester blends with heat sensitivity, or stretchy lycra/spandex.

What temperature should I set my iron to?

Set to medium-high (around 160–170Β°C) or the β€œcotton” setting on most irons. No steam.

How long should I heat it?

Press for 10–30 seconds with firm pressure, then check edges. If needed, re-press for a few seconds.

Should I Iron directly on the design?

Nope β€” always use a thin cotton cloth or baking paper between the patch and the iron to protect the print.

Can I use a heat press instead of an iron?

Absolutely β€” set it to 160Β°C for 10–12 seconds with medium pressure.

FAQs ⬇️

How do I wash clothes with the print?

Turn inside out, use cold or mild wash, and avoid harsh detergents or bleach

Can I tumble dry clothes with the patch?

Not recommended. Air dry for longer life of the patch.

Will the patch peel off over time?

If applied properly, it should last 15–20 washes.

What if my patch starts peeling or looking worn after a few washes?

You can’t revive the old one with heat. Simply buy a fresh sticker and press it on the same spot (even over the old one).

Can I remove a patch once applied?

No, a patch printed once cannot be removed

Places to apply your Iron-on patches
(just the beginning) ⬇️

Best Sellers

1 10
View all