Crystal Kiss | Iron-On Embellishment

Size is mentioned in the second image at the bottom right corner. The value mentioned is the longest dimension of the design

1. Remove wrinkles from the area where you want to transfer the embellishments
2. Peel the bottom opaque film and separate it slowly
3. Gently place the sheet on the wrinkle free area where you want to apply
4. Iron for 10-15 seconds on high heat settings. Make sure fabric on which you are applying can withstand heat
5. As the rhinestones get transferred onto your fabric, the transparent sheet will start shrinking and separate from the fabric
6. Let the surface cool down. Make sure you don't scratch and rub the rhinestones aggressively

P.S - Sheet may have some rhinestones that may fall off during transit or not transfer onto the garment. This is perfectly normal and in case a significant area is not covered, you can cut another piece and reapply on the same area

Sheet may have some rhinestones that may fall off during transit or not transfer onto the garment. This is perfectly normal and in case a significant area is not covered, you can cut another piece and reapply on the same area

The embellishments can be transferred onto any fabric that can withstand heat for 10-20 seconds. Eg: Cotton, Denim, Linen, Georgette etc.

Set to high (around 160–170°C) or the Nylon and above setting on most irons. No steam.

Press for 10–20 seconds with firm pressure, then check edges. If needed, re-press for a few seconds.

Cold water, hand-wash only. No scrubbing, no tumbler dry. Do not iron directly

Over time because of friction and usage, some rhinestones may fall off. This is perfectly normal and in case a significant area is not covered, you can cut another piece and reapply on the same area